Neil Addis (WA5JXY) wrote:
Hi All,
I looked through all the archives and the admin manual for app_rpt (as well as trying to decipher rpt.conf) to enable the temperature or other sensor (i/o) functions but I couldn't locate the info;
LM-34 temperature wiring and/or function.
Can someone that is using this function please copy and paste your section in rpt.conf that makes this work? I already have the LM-34 connected to pin 2 or the URL (as well as + and gnd), but I don't know how to interrogate it.
Thanks! Neil _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Direct connection of an LM34 to the URI is not supported. There is some experimental code in app_rpt.c to use the uChameleon USB DAQ device. The uChameleon has analog input channels which might be able to be used with the LM34 with a little bit of signal conditioning. Non of this has been tried. Steve WA6ZFT