Performed URI loopback test. Digital all passed, all analog failed (sigh!). Now I have to figure out why. Thanks, Bob kk6ecm _____ From: Bob [mailto:kk6ecm@gmail.com] Sent: Sunday, April 20, 2014 7:24 AM To: 'app_rpt-users@ohnosec.org' Subject: RE: URI Audio Out Oops... forget the ramped dc offset... config error... there is no tone on either LEFT_AC ro RIGHT_AC I've tried it with a couple of URIs without success. Thanks, Bob kk6ecm _____ From: Bob [mailto:kk6ecm@gmail.com] Sent: Sunday, April 20, 2014 7:17 AM To: 'app_rpt-users@ohnosec.org' Subject: URI Audio Out I'm testing a URI on a server with a scope connected When I send audio to the URI (CLI> radio tune txvoice 500), PTT activates the red LED (scope confirms), and the scope responds to the LEFT_AC start and stop (ramped dc offset), but no tone. I've checked both channels. I'm wondering if I have something set incorrectly. What am I missing? Here are my tx settings. hdwtype=0 txboost=1 txctcssfreqs=107.2 txprelim=no txlimonly=no txtoctype=notone txmixa=composite txmixb=composite duplex=1 eeprom=0 Thanks, Bob kk6ecm