-rpt.conf rxchannel = SimpleUSB/usb_29999 -SimpleUSB.conf ***- your config here is dependent to your cor/ptt method, this one is with parallel port, and your specific audio methods. [usb_29999] pp5=ptt pp10=cor eeprom = 0 ; EEPROM installed: 0,1 ; 0 = no (default) ; 1 = yes hdwtype = 0 ; Leave this set to 0 for USB sound fobs modified using ; the instructions from usbfob.pdf. Use a setting of ; 1 is for Dingotel/Sph interfaces. duplex = 1 ; Duplex / 0 - half duplex / 1 - full duplex ; Receiver parameters ;carrierfrom=no ;carrierfrom=dsp ;carrierfrom=pp carrierfrom=ppinvert ;carrierfrom=usb ;carrierfrom=usbinvert ;carrierfrom=vox ; Tone & CTCSS ;ctcssfrom=no ctcssfrom=dsp ;ctcssfrom=usb ;ctcssfrom=rxdemod ;txctcssdefault=100.0 ;rxctcssfreqs=100.0;67.0,71.9,74.4,77.0,79.7,82.5,85.4,88.5,91.5,94.8,97.4,100.0,103.5,107.2,110.9,114.8,118.8,123.0,127.3,131.8,136.5,141.3,146.2,151.4,156.7,162.2,167.9,173.8,179.9,186.2,192.8,203.5,210.7,218.1,225.7,233.6,241.8,250.3 ;txctcssfreqs=100.0;67.0,71.9,74.4,77.0,79.7,82.5,85.4,88.5,91.5,94.8,97.4,100.0,103.5,107.2,110.9,114.8,118.8,123.0,127.3,131.8,136.5,141.3,146.2,151.4,156.7,162.2,167.9,173.8,179.9,186.2,192.8,203.5,210.7,218.1,225.7,233.6,241.8,250.3 rxctcssoverride=1 plfilter=yes rxctcssrelax=1 ; reduce talkoff from radios w/o CTCSS Tx HPF ; Do not change this, leave this as a 1 deemphasis = no ; enable de-emphasis (input from discriminator) rxondelay = 10 ; number of 20ms intervals to hold off receiver turn-on indication rxboost = 0 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed ; Set to 1 for additonal gain if using a low-level receiver output ; Transmitter parameters txboost = 0 txmixa = voice ; Left channel output (A): no,voice ; no - Do not output anything ; voice - output voice only txmixb = no ; Right channel output (B): no,voice ; no - Do not output anything ; voice - output voice only invertptt = 0 ; Invert PTT: 0,1 ( 0 - ground to transmit, 1 - open to transmit ) preemphasis = 0 ; Perform standard 6db/octave pre-emphasis rxdemod=flat txprelim=yes txlimonly=no ; pager = no ; no,a,b (e.g. pager = b means "put the normal repeat audio on channel A, and the pager audio on channel B") ; duplex3 = 0 ; duplex 3 gain setting (0 to disable) #includeifexists custom/simpleusb.conf ----------------------------------------------------------------------------- ...mike/kb8jnm On 12/22/2018 6:06 PM, ea8ee wrote:
I have used my node as a hub for a long time and now I want to use it as a simple usb with uri which files I should modify
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.