We are running multiple nodes on Pi’s without any audio issues whatsoever. Sent from the iRoad
On Feb 5, 2018, at 17:18, Kevin Custer <kuggie@kuggie.com> wrote:
I recommend something other than a Raspberry Pi 3 for a multiple node set-up. I have several instances of single and dual node installations using usbradio on INTEL ATOM processor based computers, as follows.
Intel D2500 fanless motherboard - about $60 A Mini-itx Case/Power Supply - about $50 2 gig of RAM - about $16 Samsung 16 gig SSD MMBRE16G5MSP - about $20 (used)
This makes a very capable fanless computer for about $150.00. Yes - it's not $40.00, but it also doesn't have the machine gun effect of running usbradio on a Pi3. I've had zero issues using these used-reclaimed SSD drives. eBay is a good source for everything.
Kevin W3KKC
On 2/5/2018 6:39 PM, Pierre Martel wrote: Ok this will make the decision to buy 2 raspberry pi 3 with 4 sd card easy.
Unless someone tell me that there is a better small computer that could do the job for my 2 nodes using usbradio.
Le lun. 5 févr. 2018 à 18:04, Bryan Fields <Bryan@bryanfields.net> a écrit : On 2/5/18 5:34 PM, Pierre Martel wrote:
Yes I knew that dsp is supported on Dial but there was talk that on the raspberry pi it was not as stable as on x86 architecture.
I know of no one having issues running usbradio with current DIAL on the RPI3. I have a couple nodes running as such.
That said, I would only run one usbradio interface per RPI3, they are simply not that powerful. I use a supermicro Intel atom server for our main Tampa site, and it's got 3 repeaters running pciradio and 2 usbradio interfaces on it.
-- Bryan Fields
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.