I think what he is asking is whether the weather the Rx and Tx streams of the RTCM can be used on different nodes. In other words, at a specific site with only a single RTCM, can the transmitter be part of node A while the receiver is part of node B.
Concisely; Two repeaters, a 6m repeater and a 2m repeater. Two repeater sites; Site "A" has 6m TX and 2m RX. Site "B" has 6m RX and 2m TX. *One* RTCM at each site. chan_voter will have to have it explained in excruciating detail. Call me cheap - two RTCM is cheaper than four RTCM, and duplexing 6/2 is a lot less complex than duplexing 6/6 and 2/2. ;) Steve
Looking at his message again that may not actually be what he is looking for, though.
Steve, as long as there is only one Asterisk node involved, meaning a single repeater "system" although using multiple bands, a single RTCM at a site will work. If configured this way all the 6m and 2m receivers would link back and be voted into a single stream which would then be sent out to all the 6m and 2m transmitters at the different sites. When used like this as far as app_rpt is concerned it behaves no differently than having a voted/simulcast system on a single band.
Brett KQ9N
Of course each RTCM can transmit and receive. The receive only sites don't have the transmit parameter in voter.conf. But you seem to be asking a different question. If so, could you restate it? -- Tim :wq
On Feb 1, 2014, at 10:23 AM, Steve Wright <stevewrightnz@gmail.com> wrote:
Gurus!
Can I operate arbitrary recievers and transmitters with the voter boards, and separate them in config at chan_voter?
Background: Our terrain does not lend itself to a few high-sited duplexed repeaters (or rather we are not inclined to pay for it), so we are taking the non-duplexed distributed approach of locating recievers and
That is, site A has either a 6M transmitter and other 2M receiver, or
otherwise non-contending combinations, and the corresponding pair for each repeater receiver or transmitter is actually located on a nearby site
SO! It looks at first glance that I must use a VOTER board for each rx
AND each tx, but perhaps I can use some clever config and halve the number of VOTER boards I use.
Many thanks, Steve
-- Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers +64 21 040 5067 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to
On Sat, Feb 1, 2014 at 6:20 PM, Tim Sawyer <tim.sawyer@mac.com> wrote: transmitters at various sites on a non-contending basis and GPS locking them all together. It seems to us that if we have a hole in some coverage, that it would easy (read - cheap) to throw another GM300 at the problem.. linked with 802.11an. the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" the list detailing the problem.
------------------------------
Message: 6 Date: Sat, 1 Feb 2014 21:54:41 -0500 From: Lu Vencl <vencl@att.net> To: "<app_rpt-users@ohnosec.org>" <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] MSF 5000 URI interface Message-ID: <D9035249-1E4C-4EF8-AB58-75B4784784B4@att.net> Content-Type: text/plain; charset=us-ascii
Anyone have the diagram for URI interface to an MSF 5000?
Sent from my iPhone, Lu Vencl
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 60, Issue 3 ********************************************
-- Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers +64 21 040 5067