That did it! Thanks! Phil, N6TCT On Sat, Mar 5, 2011 at 3:41 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
Dont run chan_usbradio on Pickle. Dont even have a usbradio.conf file in your directory.
Try "susb active" and "susb tune." .. etc
JIM
Date: Sat, 5 Mar 2011 15:37:17 -0800 From: phil.n6tct@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Beagleboard URI issue: "device usb27674 currently not active"
Gang, I would love whatever help your collective brains and experience can provide on the following newbie problem.
I recently brought up a generic PC running ACID and a USB URI fob and made it all work. Yay! Emboldened by my success :-) I thought I would try getting my beagleboard running in a similar configuration ... and so far, failed. The URI green LED blinks like it should when asterisk starts. But asterisk CLI "radio key" and "radio unkey" don't do anything (i.e., they do not turn on or off the URI fob's red LED). Attempting to run "radio tune txvoice 500" generates the error "Device usb27674 currently not active". (27674, of course, is the node number for this system.) Running "radio active usb27674" does not give an error but does not change anything (i.e., radio tune still fails with the same error message).