Stacey, I used the "firmware-9.3.0-amd64-i386-netinst" as the base for the AllStarLink Install ISO. On 3/22/2018 2:35 AM, KB7YS-Stacey wrote:
Still learning, but getting there...
After no luck with getting a previous version of DIAL that was available on the ASL site to work with my fob interface, a suggestion led me to find there was a new version available. After installing and working though the asl-menu setup I finally had a working node with my old Acer Aspire One. However there were still some tasks to complete.
While working through the Allmon2 install process I thought why not use Oracle Virtual Box to test on instead of the actual system. It was a good thought however the currently available image will not install on Virtual Box 5.2.8. Just for kicks I grabbed the current 32bit Debian iso - this installed on the virtual system with no issues. Anyone have any thoughts or ideas on why the DIAL image would not work. Error is 'no kernal' during the install... and it stops. I can continue, but then grub has nothing to load when the virtual reboots. Thank for any assistance.
(PS - I did finally get Allmon2 installed and working, that was a bit of a bumpy ride, a good learning experience)
Stacey - KB7YS
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.