I too am using the Intel D510 MO with cooling fan in ia supplied case/+ps. I currently have 4 nodes on this box using URIs. 3 of the 4 nodes are full duplex repeaters with dsp dec /enc. The forth is connected to a WX radio with a WX 100 board attached. I did experiment with 4 repeaters and it worked ok. no motorboating. As it was said YMMV. I used the standard ACid install. Jon VA3RQ On 7/31/2011 2:04 PM, Ken wrote:
I don't have any scientific evidence, but would argue that you should select a board that has plenty of USB ports right on the mother board. No plug-in USB adapters.
I am running four mini-ITX (Atom D510mo) systems with URIs and small SSHD's. Board with CPU was $79. It has gigabit Ethernet and 4 USB ports on the front panel plus headers for 4 more. It has serial and parallel port headers, if you need these ports. Each system consumes 18 watts at 12 volts.
One box runs asterisk and G4KLX "sound card DSTAR" applications at the same time - others run two nodes, one with streaming audio to the internet.
No motor boating.
YMMV - this may not be the best choice in a location where the ambient temperature can go ballistic.
73 Ken
----- Original Message ----- From: "John Heron"<jh0932@gmail.com> To: "'Lu Vencl'"<vencl@att.net>; "'Michael Carey'" <michaelcarey@internode.on.net>; "'app_rpt mailing list'" <app_rpt-users@ohnosec.org> Sent: Sunday, July 31, 2011 9:25 AM Subject: Re: [App_rpt-users] Culling Linux Services (ACID)
It begs the question on what hardware really works 100% and what does not.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users