OK If you are using packet port (discriminator) then set ctcssfrom= no and carrierfrom=dsp and rxdemod=flat That should get IT working. Jon On 2/8/2014 6:11 PM, ea8ee wrote:
I use FT8900 with rear packet minidim with URI DMK so I will change ctssfrom=no/usb carrierfrom=usb or usbinvert/dsp( I think the yaesu use cor low but anyway the uri work nice with ptt and audio from internet the problem is only the audio from my rig to internet is deaf) rxdemod=flat/no
2014-02-08 22:43 GMT+00:00 REDBUTTON_CTRL <jrorke@cogeco.ca <mailto:jrorke@cogeco.ca>>:
Oh and set ctcssfrom=no That way it wont be looking for a tone decoder output to let audio in. Jon RQ
On 2/8/2014 5:39 PM, REDBUTTON_CTRL wrote:
If this is your usb radio.conf file then it is missing a couple of things.
You need the following:
carrierfrom=usb (or usbinvert if your cor is active low)
and the rxdemod must be set to speaker or flat
That should get tit listening to rx audio to start.
Jon VA3RQ
On 2/8/2014 5:31 PM, ea8ee wrote:
usb27305 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=88.5 rxctcssfreqs=88.5 ;rxctcssoverride=0 ctcssfrom=usb rxdemod=no txprelim=no txlimonly=no txtoctype=notone txmixa=composite txmixb=composite invertptt=0 duplex=0 rxondelay=o rxnoisefiltype=0 eeprom=1
The DMK works nice in TX but in RX not receive nothing
2014-02-08 20:02 GMT+00:00 Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>>:
I think it found your adapter as you said you had audio in one direction. If not see below.
Did you select the active usb device in the config utility before you tried to make changes?
If the adapter is not being found at all try this....
The following USB interfaces are defined in usbradio -
#define C108_VENDOR_ID 0x0d8c #define C108_PRODUCT_ID 0x000c #define C108AH_PRODUCT_ID 0x013c #define C119_PRODUCT_ID 0x0008 #define C119A_PRODUCT_ID 0x013a #define N1KDO_PRODUCT_ID 0x6a00 #define C108_HID_INTERFACE 3
When you boot up you should see one of these initialized in the messages. After boot do -
dmesg | more
and page through and see if it found your adapter.
I am using the DMK and it looks like this -
[root@WA3DSP_Allstar wa3dsp]# dmesg | grep Sound input: C-Media Electronics Inc. USB PnP Sound Device as /class/input/input0 input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1
*73 Doug WA3DSP http://www.crompton.com/hamradio*
------------------------------------------------------------------------ From: ea8ee1@gmail.com <mailto:ea8ee1@gmail.com> Date: Sat, 8 Feb 2014 19:14:56 +0000 To: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] audio radio to internet issue
I tried with cli and radio tune rxnoise and the pc says the device usb27305 currectly not active ! any suggestion?
2014-02-08 8:51 GMT+00:00 jose <ea8ee1@gmail.com <mailto:ea8ee1@gmail.com>>:
Hi Doug! the ptt and audio from internet to radio works nicely the problem is about the audio from radio to internet not audio neither the node receive the dmtf from radio or webstransceiver
El 08/02/2014 6:31, Doug Crompton escribió:
You need to set -
duplex=1 ; Simplex, no telelmetry duplex=0 ; Simplex, telelmetry
in rpt.conf if you are running simplex.
Also make sure the polarity is correct in your usbradio or simpleusb file for the PTT and COS if you are using it.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.