Maybe this will help...Check on modules.conf and change the following: ;noload=chan_echolink.so to load=chan_echolink.so ________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of app_rpt-users-request@lists.allstarlink.org <app_rpt-users-request@lists.allstarlink.org> Sent: Wednesday, February 28, 2018 1:00 PM To: app_rpt-users@lists.allstarlink.org Subject: App_rpt-users Digest, Vol 108, Issue 27 Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - AllStar Link<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org This list is for users of the app_rpt.c Asterisk application, the Debian Install (for) Allstar Link (DIAL) This site is dedicated to the memory of Jim Dixon WB6NIL or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Echolink on Allstar (W2rjr) 2. Fwd: Echolink on Allstar (W2rjr) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Feb 2018 10:50:05 -0500 From: W2rjr <w2rjr@aim.com> To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Echolink on Allstar Message-ID: <161dd1b3dc0-17a2-3d9b@webjas-vae229.srv.aolmail.net> Content-Type: text/plain; charset="utf-8" Hello, I have an Allstar node on a Raspberry Pi using a sound fob with a modified bofeng 888 ht. Allstar works fine just cant seem to get echolink to work. I have edited the echolink.conf in /etc/asterisk. I have the ports forwarded for the Pi's ip address. Am i missing something ? I have it working on my repeater which runs Dial and copied the file from there. I just changed the Call, the node number and pw and still does not work. Any help would be greatly appreciated. 73 Ray, W2RJR