1). That cable is for a pair of radios to use in duplex as a repeater. 2). Assuming that you have the radio connected to the RX cable, you need to change JU551 to position A for discriminator audio. -----Original Message----- From: FERNANDO VILLARROEL [mailto:fvillarroel@yahoo.com] Sent: Saturday, October 27, 2012 12:51 PM To: App_rpt-users@ohnosec.org; Scott Weis Subject: RE: [App_rpt-users] New Radio user Hi Scott. I have a single GM300 conected. --- On Sat, 10/27/12, Scott Weis <kb2ear@kb2ear.net> wrote:
From: Scott Weis <kb2ear@kb2ear.net> Subject: RE: [App_rpt-users] New Radio user To: "'FERNANDO VILLARROEL'" <fvillarroel@yahoo.com>, App_rpt-users@ohnosec.org Date: Saturday, October 27, 2012, 1:48 PM You have a single GM300 connected or a pair?
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of FERNANDO VILLARROEL Sent: Saturday, October 27, 2012 12:44 PM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] New Radio user
Dear All.
From 6 years ago i am user of Asterisk and now i am trying to connect Asterisk to Radios
I am following the howto:
http://stats.allstarlink.org/dl/installcd/allstar-centos-install.pdf
I have installed ACID succesfully
I have a Motorola GM300 conected to my Asterisk (Centos)
I have a URI interface
http://www.dmkeng.com/URI_Order_Page.htm
and the follow cable:
http://www.uricables.com/DuplexMotorola.html
I am trying to install IAXRPT on my Windows XP but i can't install because when i download show me a dowloading error.
When i run the command
test*CLI> radio tune rxnoise
The system show me:
test*CLI> radio tune rxnoise tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=15 tries=1, setting=16, meas=105 tries=2, setting=16, meas=93 tries=3, setting=16, meas=89 tries=4, setting=16, meas=99 tries=5, setting=16, meas=95 tries=6, setting=16, meas=88 tries=7, setting=16, meas=100 tries=8, setting=16, meas=71 tries=9, setting=16, meas=106 tries=10, setting=16, meas=87 tries=11, setting=16, meas=97 DONE tries=12, setting=1000, meas=97, sqnoise=0 ERROR: RX INPUT ADJUST FAILED. test*CLI>
So i need you help me in order i can testing my config or if you could tell me how i can getting started
Regards.
Fernando
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users