James, et al: ACiD is meant for a hard drive. It is not a good idea to put ACiD on anything other than a HDD. The write cycles will cause a flash drive to fail exponentially faster. If you want to use something that will work with a flash drive, use Limey Linux. It runs from RAM, and only writes to a flash drive when you save configs using svcfg. for Limey, 256MB flash will work, but it will also work with 1GB flash, as that is what I have inside the machine. ~Benjamin, KB9LFZ On Thu, 2013-07-11 at 13:48 +0100, James Hill wrote:
On 10/07/2013 11:26, James Hill wrote:
On 09/07/2013 22:30, pete M wrote:
I second. I have use a thin client (hp) for a few moths with acid. I had to install a small 44 pin ide drive for rhe install bur all was well.. I would not have run 2 node on radio usb but one was perfect
Well I'm in the process of installing acid on the Wyse V90 now.
2GB CF would not work, as there was not enough space to create the root partition. I have a 4GB on the way, so hopefully that will alleviate the problem.
For the time being, I'm using a laptop HDD with the thin lying horizontally with the case off to accomodate the drive. That will have to do for a few days until the 4GB arrives.
James 29681 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users