Actually very close but it is svcfg 73 Marshall - ke6pcv -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Benjamin Naber Sent: Wednesday, February 27, 2019 5:10 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Limey Unix - LATE REPLY Didn't see the message until now... if I recall correctly, it was: savecfg the executable(program/script) was located in the same folder as firstime.sh, radio-tune-menu, ... I *think* the sought after command, along with the others, was located in: /usr/sbin Benjamin, KB9LFZ -----Original Message----- From: Todd Lesser <todd@nccom.com> Reply-to: Users of Asterisk app_rpt <app_rpt- users@lists.allstarlink.org> To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Limey Unix Date: Wed, 26 Dec 2018 15:50:45 -0800 Does anyone know how to save the network configuration in Limey Linux? My node is currently set up as static IP and I want to change it to DHCP. I run net setup but when I reboot, it loses it all. I assume there is a command that will save it to flash memory. Does anyone know what that is? Thanks _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org /cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.