Lot’s of questions. I’ll address this one first. We ran into the same problem with Quantars. The BEW mode was created to address it and it works fairly well. Get the board firmware and the EBLEX programmer from here http://svn.ohnosec.org/viewvc/projects/allstar/voter/?root=svn You want the Voter-dspbew-SMT.cry file. The latest (v 1.47) is OK. The programming it a bit of a trick, but easy once you know how. Let me know if you need me to walk you thru it. -- Tim WD6AWP
On Aug 29, 2014, at 9:45 AM, Tom Caspar <tom.caspar@cpcomms.com> wrote:
Lastly, I was hoping to also be able to use this with some DMR radios running in analog. Unfortunately the raw rx audio coming out of the radio rolls off a 4khz, and does not seem to have enough high frequency noise content for the voting to work correctly. Has anyone successfully been able to do this?