For RTCM control, touch tone functions can be set in the [functions] stanza like so: where: xy = two digit RX ‘prefix’ xx = two digit TX ‘prefix’ nnnn = the node number site1-4 = the actual RTCM client name ; RTCM Rx control xy1=cmd,#voter prio nnnn all 0 ; All RX on xy20=cmd,#voter prio nnnn site1 -1 ; Disable site 1 xy21=cmd,#voter prio nnnn site1 0 ; Site 1 on xy30=cmd,#voter prio nnnn site2 -1 xy31=cmd,#voter prio nnnn site2 0 xy40=cmd,#voter prio nnnn site3 -1 xy41=cmd,#voter prio nnnn site3 0 xy50=cmd,#voter prio nnnn site4 -1 xy51=cmd,#voter prio nnnn site4 0 ; RTCM tx control xx0=cmd,#voter txlockout nnnn all ; All TX off xx1=cmd,#voter txlockout nnnn none ; All TX on xx20=cmd,#voter txlockout nnnn +site1 ; Site 1 TX off xx21=cmd,#voter txlockout nnnn -site1 ; Site 1 TX on xx30=cmd,#voter txlockout nnnn +site2 xx31=cmd,#voter txlockout nnnn -site2 xx40=cmd,#voter txlockout nnnn +site3 xx41=cmd,#voter txlockout nnnn -site3 xx50=cmd,#voter txlockout nnnn +site4 xx51=cmd,#voter txlockout nnnn -site4 These commands work on the *CLI> like so: *CLI> voter prio nnnn site1 -1 -- Tim :wq
On Apr 10, 2015, at 8:24 AM, Tom Caspar <tom.caspar@cpcomms.com> wrote:
I’d like to be able to dynamically control from a macro or the asterisk CLI, whether a particular rtcm in a voter node is enabled as a transmitter. Is this possible without having to manually edit the voter.conf and restart asterisk?
Thanks, Tom
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.