Just to add to Ramesh's pinouts TKR 850 -------- URI 8 (TD) --------- 23 (R_out) 9 (TA) --------- 22 (L_out) 10 (RD)-------- 21 (Mic in) 16 (EPTT)-------1 (PTT) 17 (SC) --------- 8 (Cor in) 12 (RXG) ------19 (Gnd) 19 (TXG) ------ 20 (Gnd) You may need to add the extra audio grounds RXG and TXG. Jon VA3RQ On 11/16/2014 10:11 PM, Ramesh Dhami (VA3UV) wrote:
Hi Pierre:
Try this:
TKR 850 URI
8 23 9 22 10 21 16 1 25 8
This is per my external MUX and how I have my 850 setup for dual mode (DV and FM).
Note, you will need to configure the usbradio.conf file appropriately to send the tone out on the RIGHT channel and the Audio out on the LEFT channel.
Let me know how it goes!
Ramesh.
On 16/11/2014 11:13 AM, pete M wrote:
Hi guys..
ast week i did a harness to hook my tkr-750 ver 2 to a URI
here is what I did:
tkr-750 pin ----- uri
8 to 22 (ctcss tone to tkr) 9 to 26 (voice to tkr) 10 to 21 (audio to uri) 12 to 19 (ground) 16 to 1 (ptt) 17 to 8 (cor)
I dont need the cor cause I want to do all the signaling by dsp but still hoocked it up in case..
So does this make sens? cause I cant have the ctcss level right.
I try to switch the ctcss and voice from left to right in case I had reverse the wiring. put both channel as tone and voice to test. no go I cant send ctcss from the URI.
I know I can send it from the repeater itself.. But I want to control when it is sent.
Thanks for taking the time to help me ;-)
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.