Ron Polluconi wrote:
Hello,
I have built the CentOS system and installed it via the distribution disk along with Asterisk as part of the distribution.
Everything seems OK but when I noticed that the .conf files were not passed the node and password information. I have edited the iax.conf and rpt.conf files and, hopefully resolved that issue.
My issue is trying to make the modified CM105 fob come up and be recognized. Watching the boot process for CentOS it seems the fob is seen and recognized but when I enter into the the Radio Tune functions I get the following;
Radio Tune Active Radio interface is [USB] Device string is Card is -1
The RED and Green LED's on the FOB are both on solid not flashing as noted in the set up text.
When I try a command
Radio Tune Txvoice 500
The response is Device USB currently not active.
Any an all help is very much appreciated....
Thanks,
Ron Polluconi rpolluconi@verizon.net KJ7IY - ORRC Region 2 Director
------------------------------------------------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
If the LED is not continually blinking, Asterisk is probably not seeing your usb device. CM105 is either a typo or we don't support it. CM108 chips are supported. Also, there are several unscrupulous vendors on the web claiming their devices are CM108's but they really aren't. Several people have been fooled by these guys. If you pop the plastic cover, the chip should say CM108 on it. The best way to set up your first node is to purchase the URI and not go through the grief. Once you get comfortable with how things are set up, then you can try the modified fobs. nodesetup.sh can be used to set the node number and password, but if you modified iax.conf and rpt.conf, then it will probably complain the file is inconsistent with the others. If you saved the originals, restore them back and use the nodsetup.sh script. Steve WA6ZFT