Is this how yours looks? It still gives me *CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 2521 162.218.153.251:6361 60 Registered 67.215.233.178:4569 N 2232 162.218.153.251:6361 60 Registered 67.215.233.178:4569 N 27685 162.218.153.251:6361 60 Registered -- Tim :wq On Aug 22, 2014, at 7:56 AM, Michael Wolthuis <wolthuis@gmail.com> wrote:
Tim, I run PFSense with many of my Allstar nodes. I have to set STATIC outbound NAT for the specific IP addresses that are Asterisk. This will cause them to not pick random ports outbound.
I am not sure what iax2 show registry does, but I could not get it to work until I put in a static NAT outbound.
Here is a copy of my outbound NAT statement for one of my nodes:
WAN 172.16.12.22/32 udp/4569 * udp/4569 WAN address * YES
I believe the key is the last YES, which is the STATIC PORT heading.
Hope that helps, Mike kb8zgl
From: Tim Sawyer <tim.sawyer@mac.com> Date: Friday, August 22, 2014 at 10:52 AM To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] pfsense router?
Is anyone using a pfsense router in your Asterisk network? While app_rpt seems to work fine it shows a weird port, not 4569, with “iax2 show registry”. I assume pfsense is doing something weird with NAT that I don’t understand. Can anyone shed some light on this subject?
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
