[tonemacro] 100.0=*7 ----------------------------------------
Date: Mon, 22 Mar 2010 22:18:00 -0400 From: wa1sot@pcom.com To: App_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Using CTCSS to send commands to app_rpt
Jim,
Any pointers in how to use tonemacro? I looked for documentation but only found that it has not been documented yet. I also looked at the source code and config files and was not able to figure out how to configure tonemacro.
Thank you for all the work you have done on this excellent software,
Jim WA1SOT
been there, done that, got the t-shirt. use the '[tonemacro]' section of rpt.conf.
JIM
----------------------------------------
Date: Mon, 22 Mar 2010 20:34:25 -0400 From: wa1sot@pcom.com To: App_rpt-users@qrvc.com Subject: [App_rpt-users] Using CTCSS to send commands to app_rpt
Since we are discussing non DTMF methods of sending commands, I'd like to mention that the ability to send a command by changing CTCSS tone would be useful for me as I do not have a DTMF microphone but I can program a different CTCSS into the radio to send a command. While you are looking at the code please keep my request in mind. Thanks in advance, Jim WA1SOT _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users