Agreed 100%!! 73 Jim W7RY From: George Csahanin Sent: Sunday, June 29, 2014 9:23 PM To: Tim Sawyer ; Bradley Haney Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] QUESTION on making a receive only node Not just level but speaker audio (should) has filtered audio and PL won’t be there...speaker audio = bad audio.(Editorial comment: this is one way Echolink gets to sound Soooooooo bad) George J Csahanin W2DB Cedar Park, TX 2360 From: Tim Sawyer Sent: Sunday, June 29, 2014 10:29 PM To: Bradley Haney Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] QUESTION on making a receive only node Nope, the USB dongle MIC input only needs a few hundred millivolts. Speaker is way more that that. What are you intending to sue for the receiver? Perhaps someone on this list will be familiar with your radio and can suggest a better place to get audio. -- Tim :wq On Jun 29, 2014, at 8:12 PM, Bradley Haney <hammin75@gmail.com> wrote: Hello all we would like to extend our repeater receive area by putting in a receive site but with a different PL tone . we have an area that we lose HT coverage but can hear it fine from the main tx of the repeater site. . Could i just buy a USB FOB CM108 and not mod it and just plug in the speaker from the radio into the Mic of the dongle? Thanks for your help _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.