You can use alternate ports for IAX. I'm using 4568, since 4569 is already occupied by another Asterisk switch. You have to be careful of the order of the bind port and bind address in iax.conf and I think you have to call them both out if you are not using the default port. This is what's working in my iax.conf: . . . [general] bindport=4568 bindaddr=0.0.0.0 . . . You also have to call out the port number in the server configuration -> (your server ID) -> network configuration of the portal. This is how the other nodes find out they need to connect to you on your alternate port number. On Jun 20, 2012, at 10:02 PM, (KP4TR)Ramon Gonzalez wrote:
Hello,
This may be a simple question. In iax.conf, it indicates the default UDP port to bind to (4569). Is it possible to use an alternate port other than 4569 and make change here?
In some other post they mention to change configuration on allstar server network settings, but I don't believe that has anything to do other than to download that configuration to the server if requested by me.
I know port forwarding needs to change in router and asterisk restarted.
Thanks.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users