I have a Yaesu FT-8800. It can do two bands at once. Maybe I just need the right cable between it an my URI? On Sat Jan 17 2015 at 12:26:34 PM Skyler F <electricity440@gmail.com> wrote:
The easiest way would be a cross band repeater, have it transmit on uhf, and receive on vhf or vice versa.
Then use the baofeng radio to transmit to your node, they are cheap and they can transmit on a different band then they receive on.
What you will need:
Uhf radio Vhf radio UHF antenna VHF antenna Urix Computer If you have a dual band antenna: a diplexer Radio to talk to it
On Saturday, January 17, 2015, Elden Fenison <w7ldn@w7ldn.com> wrote:
Please excuse my ignorance on this. But one of the advantages of Allstar over say IRLP is the ability to operate full-duplex. My understanding on this is limited. But apparently full-duplex is not possible without setting up a repeater.
Since many folks seem to setup nodes in their residences... is it common for them to have repeater setups that allow them full-duplex operation at home? Is there a relatively cheap/easy way to do this?
Any tips are very appreciated. :)
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com