Will, Download the ARIB schematic from zapatatelephony.org and check all the op-amp outputs in the receive audio chain for audio with a scope. Maybe you are missing the NO TS-64 jumper? Will wrote:
Steve,
I've played around with the permisson and have made it work as you stated. I will revisit
The audio now is my concern and can't figure out why the ARIB card is not processing it.
I have measure a least 250 millvolt on pin 3 (RX), the input pin on the ARIB and will not pass audio for processing.
I have turn the RX gain with no respones in the audio levels.. could there be a programable adjustment in the zapata.conf?
Look like I need to go back and read hi hi but Where?
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt