Also noticed "I have the receiver audio connected to pin 22 Left_Out." Receive audio goes to mic in pin 9. On 10/29/2015 9:55 AM, Mark DuMoulin @ WB2ERS wrote:
Hello all. New user here trying to get up to speed.
I connected a DMK URI to our Asterisk running ACID.
We configured it as follows:
----------usbradio.conf-------------
[general]
[usb]
hdwtype=0
rxboost=1
rxctcssrelax=1
rxctcssfreqs=100.0
carrierfrom=usb
ctcssfrom=usb
rxdemod=flat
txprelim=yes
txlimonly=yes
txtoctype=notone
txmixa=voice
txmixb=no
invertptt=0
duplex=1
------------------rpt.conf--------------
[1444]
rxchannel=Radio/usb
erxgain=-3
etxgain=3
controlstates=controlstates
functions=functions
phone_functions=functions
link_functions=functions
telemetry=telemetry
wait_times=wait-times
context=radio-usb
callerid="WB2ERS" <0000000000>
idrecording = |WB2ERS
accountcode=RADIO
hangtime=1000
althangtime=4000
totime=170000
idtime=540000
politeid=30000
idtalkover=|iid
nounkeyct=1
duplex=1
----------extensions.conf----------
[radio-usb]
exten => 1444,1,Ringing
exten => 1444,n,Wait(3)
exten => 1444,n,Answer
exten => 1444,n,Rpt(1444|X)
exten => 1444,n,Hangup
-------------iax.conf--------------
[IAXURI]
type=user
context=radio-usb
auth=md5
secret=mysecret
host=dynamic
disallow=all
allow=gsm
notransfer=yes
callerid=IAXURI
We have one way audio and signaling from the Ethernet side to the radio side however from the radio to the Asterisk, nothing.
I verified that CTCSS detect (pin 7) goes from 5v to 0v upon receive signal .
I have the receiver audio connected to pin 22 Left_Out.
Any ideas?
Mark DuMoulin
WB2ERS
Wb2ers@metcom.com
C 800-410-3130
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.