Hi Steve, I have been having fun with your install script... I put together a MicroITX system with 2 USB Fobs and I just got in a FXO card... I have not however, installed the fxo card ... I thought I would ask you a question before I install it!! Will the system (as set up with your script) recognize the fxo when I boot it? or should I start over from scratch?? It takes me approximately .5 hours to get the asterisk APP-RPT Installed... Then I spend hours trying to get the APP-RPT setup!! heheh Also, Is the number you gave in your last email an Asterisk system??? I might call just to see how it sounds. OH>>> I also went from EVB 010 to 011 the only change I saw in it was the commercial Voip Web Page... I wish I was a programmer I would put some kind of web settup (like the FREEPBX) to set up the APP-RPT. I am working on a system that we can use in our county as a backup for telephone comms amongst first responders. Thanks for all your efforts!! they have made my efforts much easier!! Best Regards Roger F. Jordan Sr. W4RFJ _____ From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Steven Henke Sent: Wednesday, January 23, 2008 4:46 PM To: app_rpt@lists.illiana.net Subject: [App_rpt] Update Utility Update Regarding my earlier e-mail use the following to make sure you get the latest software properly installed: cd /usr/local/bin wget -N http://xelatec.com/asterisk/svn_rpt_update <http://xelatec.com/asterisk/svn_rpt_update> Then run svn_rpt_update. 73, Steven Henke, W9SH