The probably easiest way to get an answer to your question is to determine it emperically. Download the following image: http://stats.allstarlink.org/limeylinux/downloads/cfimg-i586-via-1.1.5.tar.g... and IMAGE copy it (after un-tarring) to the flash drive (using dd or equivalent). If it boots, and "talks" to the ethernet, etc, then it works. Otherwise, it doesnt. JIM WB6NIL From: petem001@hotmail.com To: app_rpt-users@ohnosec.org Date: Wed, 21 Dec 2011 15:46:27 -0500 Subject: [App_rpt-users] Limey Linux on a HP T5630 Thin Client I Have a few T5630 thin client that was donated to me (spec: 1ghz CPU , 1 gig of ram, 1 Gig flash drive) they have a VIA chipset that have Video , network, and audio device I am wondering if I could use that thin client with Limey to do a Allstar node AND an echolink node.. I would connect that to port 3 of my rc210 controler that I have for my 2 M and 70 cm repeater’s. If possible, how to i build the thing?? I know a few thing about Linux but I am no way a guru.. I do prefer a windows machine, but I know that Linux in more stable.. So is it possible or am I dreaming? forgot to tell you that there is a serial and printerl port to the machine you can see the spec there: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01571963/c01... Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users