I tried unsuccessfully, to run ACID virtualized on a VMware Server a couple of years ago. Everything seemed to be fine but the audio was always choppy, no matter what I did. The hardware was more than adequate with plenty of resources available to the VM but it just would not pass clean audio. Since it was running at a colocation facility on a 100Mbps up/down connection, bandwidth wasn't the issue either. Just thought I'd share my experience with the group. I've since, installed ACID on dedicated hardware at the colocation facility and it's been flawless ever since. --- Rob Pectol - AH2S AllStar Node 2147 On 2014-05-09 08:51, David McGough wrote:
Hi Trevor,
I seriously doubt this approach will give you anything even close to satisfactory results. Any type of VoIP application requires instantaneous server availability or your audio quality will be lousy. Virtualized servers (such as provided by the host you mention) work okay for websites, etc., where host latency is tolerable. But it flat out won't work for VoIP.
For your first step, you *really* need to build a system on a small dedicated box, using the distro you're considering. Then, try virtualization using a free package like VirtualBox. Once you've achieved these steps, next consider how to host the conference server.
BTW, I'm not trying to dissuade from trying this, but, there will be a steep learning curve.
73, David KB4FXC
On Thu, 8 May 2014, Trevor Halsey wrote:
HI, I'm trying to make a node/conference server on a Amazon server, e.g. a virtualized server without the capability to use an iso, I have to use a prebuilt image of debian, redhat, centos, or whatever distro is available there. Is there something out there instruction to do this on a CentOS 6 (x86 or x64, does it matter?) instance? My final goal is to be able to just make the machine a public image for others to install as well, but I'm still learning on how in the world I'm supposed to use Amazon AWS. Keep in mind I'm using their free package, 1cpu, 60gb of storage, and ~600mb of ram. I saw some instructions for raspberri pi, but I can't seem to find them again.
I'm also looking to install freestar (I though I saw Ramesh in the somewhere in the archives) on top of apt_rpt in the future to be an echolink, allstar, and xrf reflector, but I'm having trouble for the initial steps after installing the OS. (Sucks to be a linux n00b.) I'm intending on using this only on occasion at first, where my county might have a need to bridging Echolink, AllStar, and DStar to a weather net for any/all connectible repeaters in the coverage area when a tornado warning occurs.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.