That is already there for usb dongles. From the sample usbradio.conf: txtoctype=notone ; Transmit tone control type: no,phase,notone ; no - CTCSS tone encoding with no hang time ; phase - encode CTCSS and reverse phase ; AKA ("reverse burst") before unkeying TX ; notone - encode CTCSS and stop sending tone before unkeying TX ; AKA ("chicken burst") -- Tim :wq On Oct 22, 2009, at 10:36 PM, Steve Gladden wrote: I know it's so much easier to ask for features than it is to build them ;-) But while we're at it here's a really nifty one I've always liked that Motorola & GE radios have had for years.. ( CTCSS reverse burst aka STE Squelch Tail Elimination) http://www.repeater-builder.com/rbtip/reverseburst.html I might even work at this myself sometime.. It's not a very important feature it's just a nifty one. Just thought I'd throw the idea out there for fun.. Also if any folks are not familiar with this that's a good like to check out and learn a tidbit about it. I've also been spoiled for a long time using Motorola stuff and not ever hearing a squelch tail :-) Steve. hwstar@rodgers.sdcoxmail.com wrote:
See comments interspersed below.
Steve WA6ZFT
From: "Scott Weis" <kb2ear@kb2ear.net> Date: 2009/10/22 Thu AM 10:10:23 PDT To: "app_rpt users list" <app_rpt-users@qrvc.com> Subject: [App_rpt-users] Feature request(s)
Hi All,
I have a few feature requests. They are:
1). Output CTCSS only when valid input present (Local or remote), not during hang time, ID's etc.
This will have to be revisited after we gain the ability to change CTCSS tones to app_rpt. There's no way for app_rpt.c to do change CTCSS tones dynamically because XPMR/chan_usbradio.c does not support this yet. There is an open Mantis feature request to add this ability to chan_usbradio/XPMR, but this work will have to be done by Jim, WB6NIL, and Steve Henke W9SH as I am not cognizant of the internal workings of this code.
2). Initial ID. After timer expires due to inactivity it gives a different ID than the normal 10 minute ID. (ex: Welcome to the XYZ repeater, PL 123.4 instead of CWID or other Voice ID)
Please log as a feature request on http://mantis.qrvc.com. You'll need to sign up for an account if you don't alreay have one. Suggested title: Add Separate Clean Up ID Message
3). Some way to insert a pause in to macros.
Why is this needed? What problem are you trying to resolve?
Thanks in advance.
73 de Scott KB2EAR
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users