Willem, Just add another node stanza in rpt.conf. Use the same definitions as in your public stanza. Then go through and change whatever you want to work differently for the private node. Set it up for the radio port you want to use or make it a pseudo node - no radio connected if you want. Do not include the lines to send the data to allstarlink. Comment them out. Also use a node number of <2000 and add this line down below after you public radio node that is defined in the same way - xxxx = radio@127.0.0.1:4569/xxxx,NONE xxxx = the private node you define in the above stanza. You can use the same or different macro, scheduler, functions, etc stanzas as your public node or define specific ones for the private node. Say you your public node was 28000 and you had a stanza macro=macro28000 in that stanza. You could put that same definition in your private node stanza if you wanted to use the same macros as 28000. Of course you could also define completely different ones specific to the private node if you desire. It is always a good idea to make a backup copy of your current rpt.conf before you start messing around. That way you can always go back if you do something that fouls things up. You can live reload the modified rpt.conf without rebooting - in CLI - rpt reload 73 Doug WA3DSP http://www.crompton.com/hamradio
Date: Sun, 20 Apr 2014 21:58:31 -0600 From: willem@prinmath.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Dual node server
I would like to set up a server with two nodes. I know you can do it on the web site but I actually want to set up the second as a private node. Could somebody send me example config files I could use to figure out which stanzas I need to repeat for each node and what other config lines need to appear for each node? 73 Willem _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.