K I'll try that. The Tx LED was on on the RTCM. Jesse
On Sep 3, 2015, at 7:39 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
Do a menu 98 in the RTCM telnet console while PTT is locked. Is the PTT asserted?
On Thu, Sep 3, 2015 at 6:55 PM, Jesse Lloyd <ve7lyd@gmail.com> wrote: Solid state meaning no spinner hard drive, that's all.
Jesse
On Sep 3, 2015, at 5:57 PM, ronald simpson <n6gkj1@gmail.com> wrote:
OK ... I always assume that ALL modern personal computers in the public domain are SOLID STATE....
On Sep 3, 2015 5:56 PM, "ronald simpson" <n6gkj1@gmail.com> wrote: OK maybe an industrial "tube type" non-fanless x86 PC
On Sep 3, 2015 5:47 PM, "Jesse Lloyd" <ve7lyd@gmail.com> wrote: Lol, no it's a new MSI industrial solid state fanless PC. Designed for use in industrial control settings or vehicular use.
Jesse
On Sep 3, 2015, at 5:40 PM, ronald simpson <n6gkj1@gmail.com> wrote:
Maybe a "tube type" x86 pc??
On Sep 3, 2015 3:29 PM, "Jesse Lloyd" <ve7lyd@gmail.com> wrote: Ya this is running on solid state x86 PC. I dug around the list a little and I'll have to do a rpt dump and see what's hanging it up, app-rpt or app-voter
I had this happen twice while I was in the asterisk console using voter display, maybe voter display has a bug that causes this, not sure.
Thx,
Jesse
On Sep 3, 2015, at 3:15 PM, "kk6ecm" <kk6ecm@gmail.com> wrote:
Not sure it's you issue, but I had the same experience on a Beagleboard-xM; kept rebooting, which would last awhile. I finally reseated the microSD memory card, and have not had an issue for many months now. the xM runs on the microSD card.
Thanks,
Bob
kk6ecm
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jesse Lloyd Sent: Thursday, September 03, 2015 10:58 AM To: app_rpt Subject: [App_rpt-users] Stuck Tx on System
Hi All,
I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition.
Any thoughts on how I should troubleshoot this?
Thx,
Jesse
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim