I've use just an unmanaged switch, which would fail to 10 half. A fully managed one that you can force your duplex setting on would probably work fine. Cheers, Jesse
On Nov 29, 2017, at 4:53 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 11/29/17 7:07 PM, Jesse Lloyd wrote: I suspect that if you get a packet collision using the 10 Mbps 1/2 duplex then the delayed packet used for timing breaks things... this is a guess at this point.
What kinda of switch do you have this connected to? A proper switch should eliminate any collisions. I have an EX everything plugs into, and you will need to set the RTCM to full duplex and manually configure the switch to 10/full. The RTCM doesn't do auto negotiation, and the switch will default to 10/half if it fails (this is the 802.3 standard)
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.