I would also like to see if we could make one of the I/Os go the ground when the node is onlink? I have been wanting to experiment with some controllers on Allstar and would like some way to tell the controller to change the CT to onlink. Thanks, Monty On Wed, Sep 29, 2010 at 10:15 AM, Ken <ke2n@cs.com> wrote:
I was interested to see this comment on the output lines. Inputs would be nice too.
I have mentioned in some previous correspondence that it would be GREAT to have some digital I/O control – for example: the weather radio application. You could sense when the “alert” or “warning” LED’s were on with the inputs (and change the courtesy tone or tail message, perhaps) and hit the “play” button with the output, to catch the latest warning message details (warning messages are not sent out on the internet as mpeg podcasts, for obvious reasons).
This kind of functionality is standard on commercial repeater controllers (previously used here RLC and CAT WX200 – RLC Club deluxe had 5 input lines and 8 output lines, its successor - the DSP404 - has 16 of each and 15 analog channels).
The mind boggles at the things you could do if there were some user-useable I/O and a simple way to read/write these under the control of app_rpt macros and/or external programs.
73
Ken
KE2n
*From:* app_rpt-users-bounces@qrvc.com [mailto: app_rpt-users-bounces@qrvc.com] *On Behalf Of *Jim Duuuude
*Sent:* Wednesday, September 29, 2010 12:12 PM *To:* n3fe@repeater.net; app_rpt mailing list *Subject:* Re: [App_rpt-users] Maxtrac as a remote base
That's an interesting question. Obviously the USB device has a couple of outputs on it that certainly could be accessed by the chan_usbradio and/or chan_simpleusb modules and controlled through app_rpt. The URI was also designed with this in mind, being that we brought all the outputs out to the connector.
In nearly 10 years that this project has been going on, you are the FIRST person to even ask this question or show any interest in using these outputs. This is the main reason why I never bothered to implement this functionality.
Sure, it can be done. Yeah, Ill work on this. Heck, even if you're the only person that ever uses it, at least you can benefit from the work involved.
JIM WB6NIL
Date: Wed, 29 Sep 2010 10:05:21 -0400 From: n3fe@repeater.net To: app_rpt-users@qrvc.com Subject: [App_rpt-users] Maxtrac as a remote base
I have been up and running now for about a month. I have added a maxtrac radio to use as a remote base. On my other controllers I would pulse a line to ground momentarily to move the channel up or down. I have done some reading and I haven't seen anything that talks about app_rpt doing this.
Does asterisk/app_rpt have the ability to work with outputs? What would need to be done to be able to do something like this if something isn't already in place for it?
Corey N3FE
-- This message was scanned and is believed to be clean.
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
=
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Monty