Jeff;
Ok, I'm having sme trouble tuning the rxnoise, but I think I know why. I'm using a Motoroa Radius setup, and although the accessory pin output is discriminator, It is muted with the squelch on the radio. Does anybdy know a way around this? Is there a way to keep that pin from being muted? I would think you can set the squelch open all the time in the RSS tuning procedures..
The other option, which I can't seem to find info on, is simply using the cor pin. How would I go about configuring a node for COR. And my last dumb question... For the moment I'm trying to set this up without alstarlink. How should I set this up so it's not trying to connect to allstarink?
Put a semicolon in front of the registration line in the iax.conf file.. it will stop trying.. Ok, now for the background of the setup because I know people are going to ask.
I'm using the ACID install with a modified CM108 USB device. I hooked the device up to a Windows PC to test the audio. I could indeed hear (by raising the MIC volume all the way up) audio from the radio, but no noise when there is no transmission. That's how I know it's muted with the squelch on the radio. I could also play a sund clip I recorded over the radio if I held the PTT key on the mic. So I know the audio is all working. And in asterisk CLI I did "radio tune txvoice" and the radio keyed up perfectly fine and transmitted the tone. So all I have left is to figure out how to get the raw unsquelched noise, or use the COR line from the radio. As for the radio, if there are any motorola peple here, I d have the software and a home made cable that works. So I have gone into the accessory config and changed the pin setup to fit my needs. Figured I'd throw that in before anybody asks. If you get a used radiio you never know what the last person did with the config.
Thanks, Jeff
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users