Yes, it is the current version in SVN. Its committed. My brain in pretty much fried at the moment. Perhaps I should be committed as well :-). P.S. I was under the impression that there was already a way of setting a channel variable from the Asterisk CLI, but a very brief glance a few moments ago did not turn anything up. Do any of you know a way of doing it?? If not I should have included that, as it would really be cool to be able to set stuff from external Linux processes. JIM Date: Sat, 9 Oct 2010 22:02:45 -0400 From: k1lnx@k1lnx.net To: app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!! WHOA! The event management subsystem looks awesome, good work Jim!!!! Thanks for coding this up!!!!! Is this commited to SVN? Stephen K1LNX On Sat, Oct 9, 2010 at 9:41 PM, Jim Duuuude <telesistant@hotmail.com> wrote: After seeing much enthusiasm regarding getting access to GPIO pins on the URI/USB devices, I gave some thought to what would be the best and most efficient way to implement it, and came up with the following: http://app-rpt.qrvc.com/node/177 "Manipulating GPIO signals within chan_usbradio and chan_simpleusb" see also: http://app-rpt.qrvc.com/node/176 "Event Management Subsystem" The bad news is that I discovered (after much head pounding) that on the CM108AH chips, they removed GPIO 2, making only 2 GPIO pins available. That is not a positive thing, as far as I am concerned. Oh well, I guess 2 is better then 0. JIM WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users -- **************************************** Stephen Brown - ARS K1LNX Johnson City, TN EM86 http://www.k1lnx.net PSTN: 423-665-9367 SIP: k1lnx@k1lnx.net **************************************** _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users