Hi I am attempting to set up an Allstar node(s) 41748 and 41749, I am using an Acid install cd iso downloaded from Allstar website, setting up onto a via cn1000 motherboard with 1gb ram and a 4gb Disc on Module (previously used as IRLP node 5228 ) I have purchased a URIx (no eeprom) from dmk and have connected to a motorola gm300 with an active low cos line the radio controls the ctss access on 88.5, initially until I discovered that I had to select usb invert my node would not respond nor show dtmf char(s) in asterisk cli. However since inverting usb (in usbradio.conf) my node will respond to dtmf tones but and here is my problem it will not ³hear² 2, 3, and 6 and, 5 is sometimes will sometimes won¹t clearly I messed something up in the install so I reinstalled via the allstar portal yet the problem remains, its not the radio I have tried 4 different radios with same results I can connect from the web transceiver to my node and send dtmf code all of which do work, and are transmitted to from my node radio . My linux experience is very limited . But learning :) I can spell it.. but seems the pronunciation can lead to argument.. If someone could give me some pointers I would be extremely grateful Regards Keith 2M0SBP / MB7IAR