I had ask for this a while ago as well. A switch of some sort would be nice so we could allow passing of DTMF tones. I didn't get to far... Corey N3FE ________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Neal Garbenis [njgarbenis@gmail.com] Sent: Friday, April 01, 2011 7:08 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] regenerate dtmf touchtones Is it possible to send or regenerate a dtmf tone across a link without being muted. I want to be able to control a linker II controller over the link if possible. I have tried the ilink dtmf commands set up in macros with no success. They don’t make it through to the controller I am trying to control on the other end. Thanks Neal NG8Y -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=A19C02F7D6.A5DFF>