Ah, OK, so I interpret that to mean, leave it in, and don't be concerned? Welcome back Jim... It is good to "see" you reengage. Thanks, Bob kk6ecm 73 -----Original Message----- From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Friday, May 20, 2016 4:56 PM To: kk6ecm; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] What does "fever=1" tell me inusbradio_tune_xxxxx.conf after setting up the receiver? That mean that it's "infected" with the WORKING version of the front-end code in the xpmr DSP front-end stuff. (Actually it stands for "front-end version"). There was a bug in older versions that was fixed, and the "fever" parameter was added to not require older installations to "have" to re-calibrate their stuff. Jim ________________________________________ From: app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of kk6ecm <kk6ecm@gmail.com> Sent: Friday, May 20, 2016 4:53 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] What does "fever=1" tell me in usbradio_tune_xxxxx.conf after setting up the receiver? What does "fever=1" tell me in usbradio_tune_xxxxx.conf after setting up the receiver? Thanks, Bob kk6ecm 73 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.