Ronald, Any valid command in the CLI can be given at the Linux prompt. Precede it with asterisk -rx "commands" /usr/sbin/asterisk -rx "rpt fun 27225 *328190" would connect node 27225 to node 28190 /usr/sbin/asterisk -rx "iax2 show registration" would show registration. etc..... 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Mon, 9 Jun 2014 19:34:20 -0700 From: n6gkj1@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Node linking from Linux command prompt Looking to see if anyone knows if it is possible to connect to a node from the Linux command line prompt vs using the Asterisk CLI... _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.