Hi All: With tremendous help from Jim, we have chan_simpleusb and app_rpt running on an Alix 3d3 single board (embedded) system. The Alix board runs Centos off a 2GB CF card; has a 500MHz processor, 128MB of RAM, is DC powered, making it an attractive solution for remote sites. For testing, I just have a single radio connected to it and it is working very well indeed. Next step is to connect a full duplex repeater and see how that goes. I am sure that it will be fine if early indication is anything to go by! Thank you Jim! Ramesh. www.va3uv.com A member of the FREE STAR* team. Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: "K&R Yoksh" <yokshs@sbcglobal.net> Sender: app_rpt-users-bounces@ohnosec.org Date: Sun, 31 Jul 2011 16:43:41 To: app_rpt<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] chan_simpleusb Just a status update for the list... I've been running the new simpleusb for about 24 hours.. So far, it seems to perform just as chan_usb.. Parallel port cos/ptt is working well, along with parallel GPIO. I'm noticing less audio "jitter" with simpleusb... Not surprising, as I am using only a P3/866 for 2 RF nodes... 73. Kyle K0KN --- Original Message --- well *certain* people (you *know* who you are :-) :-) were *SUPPOSED* to be alpha-testing a version that supports that. That was now at least a couple of MONTHS ago! I dont suppose, Kyle, that *you* would be interested in doing that for me.. like NOW.. would you?? :-) Thanks JIM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users