So I posted yesterday about this and I've been trying to track it nightly using the CLI. I got the exact same error this morning at exactly the same time. What I don't know is this a problem with my node or could my cable modem that I use as a router doing some sort of restart every night. Thank you if any of you can help. If you require more information I will do my best to provide it. Thank you, Bob/N1XBM [Mar 18 01:05:07] ERROR[12980]: chan_usbradio.c:2635 usbradio_read: HID process has died or something!! [Mar 18 01:05:07] WARNING[2254]: chan_iax2.c:921 jb_warning_output: Resyncing the jb. last_delay 5725, this delay 9936, threshold 1018, new offset -9936 -- Hungup 'Zap/pseudo-1874851583' -- Hungup 'Zap/pseudo-956001320' -- Hungup 'Zap/pseudo-1322157630' -- Hungup 'Zap/pseudo-301812068' -- Hungup 'Zap/pseudo-1535777638' -- Hungup 'Zap/pseudo-995351965' -- Hungup 'IAX2/71.171.83.18:4569-6504' -- Hungup 'Zap/pseudo-1266036207' -- Hungup 'IAX2/108.33.72.83:4569-8778' -- Hungup 'Zap/pseudo-2078653001' -- Hungup 'IAX2/n1xbm-3115' -- Hungup 'Zap/pseudo-1922300068' [Mar 18 01:05:07] WARNING[2236]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 == Set device 4-2 to usb27086 [Mar 18 01:05:07] WARNING[21771]: chan_usbradio.c:1736 hidthread: Loaded parameters from usbradio_tune_usb27086.conf for device usb27086 . [Mar 18 01:05:07] WARNING[21770]: chan_usbradio.c:2710 usbradio_read: Possibly stuck USB read channel. [usb27086] [Mar 18 01:05:07] WARNING[21770]: chan_usbradio.c:2713 usbradio_read: Nope, USB read channel [usb27086] wasn't stuck after all.