the email ke6pcv from website uricable refused the order 2012/6/27 Eric Harrison <n7jys@yahoo.com>
That being the case you can still use the dsp to detect ctcss. Providing your audio coming from the 8900 will pass ctcss.
Eric
Sent from Yahoo! Mail on Android
------------------------------ * From: * ea8ee <ea8ee1@gmail.com>; * To: * Matt Beasant <g4rky@yahoo.co.uk>; * Cc: * <app_rpt-users@ohnosec.org>; * Subject: * Re: [App_rpt-users] DMK uri FT8900 help * Sent: * Wed, Jun 27, 2012 1:49:57 PM
I Ordered the cable to ke6pcv but the answer arrived with this email is not registered
2012/6/26 Matt Beasant <g4rky@yahoo.co.uk>
I seem to remember using my 8900 for a link once and found that the COS output was exactly that, simply an output from the carrier squelch.
What I am saying is that the COS output is not subject to CTCSS, so even if the tone decoder in the 8900 is set up for decode, the COS line still just follows the carrier squelch.
Matt G4RKY Currently in Alcaniz!
On 24 June 2012 16:04, (KP4TR)Ramon Gonzalez <kp4tr.ramon@gmail.com>wrote:
The wiring is same as Kenwood TM-D700 and Icom IC880H (i have used both radios with same cable wiring as Yaesu 8800)
Go to page 10: http://www.yaesu.com/downloadFile.cfm?FileID=754&FileCatID=150&FileName=FT%2...
If using URI FOB and COS from radio, use carrierfrom=usb
Make your own cable, or order at http://uricables.com/Yaesu-FT8800R.html
On 6/24/2012 5:08 AM, ea8ee wrote:
Any info about the wiring to minidin 6pind yaesu ?
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users