Mark, Well those numbers look okay for txmixaset and txmixbset. If they both totaled over 1000 then I was thinking it could be an issue. Marshall From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Mark Johnston Sent: Sunday, January 27, 2019 2:06 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Choppy Audio ; devicenum=1 devstr=1-2:1.0 rxmixerset=125 txmixaset=125 txmixbset=500 rxvoiceadj=0.315000 rxctcssadj=0.646453 txctcssadj=100 rxsquelchadj=590 fever=1 That's my usbradio.conf, the tuning file doesn't have txtone/txvoice On Sun, Jan 27, 2019 at 1:46 PM Marshall Oldham <ke6pcv@cal-net.org> wrote: Mark, What are your settings for txtone and txvoice in your usbradio.conf? Marshall - ke6pcv From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Mark Johnston Sent: Sunday, January 27, 2019 12:08 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] Choppy Audio Hello, ... Issues with audio on ASL 1.01 GIT version 004b9dd Usually issue clears up after reboot, was happening every few months, now seems every day/few days... This does not appear to be network issue, as ID's and courtesy tones, local audio files, are also impacted. Using DSP aka usbradio issue is heard even via phone portal using standared URI Single Node 4.9.0-6-686-pae Kernel Intel Atom CPU 1.8Ghz 2GB Ram SSD load average: 0.12, 0.07, 0.02 Logs show: [Jan 27 11:55:49] WARNING[372] chan_usbradio.c: Loaded parameters from usbradio_tune_usb_27038.conf for device usb_27038 . [Jan 27 11:55:49] WARNING[370] chan_usbradio.c: Possibly stuck USB read channel. [usb_27038] [Jan 27 11:55:49] WARNING[370] chan_usbradio.c: Nope, USB read channel [usb_27038] wasn't stuck after all. [Jan 27 11:55:49] NOTICE[372] chan_usbradio.c: USB Adapter has no EEPROM installed or Checksum BAD on channel usb_27038 Dmesg: [ 314.006920] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 366.570103] perf: interrupt took too long (3169 > 3133), lowering kernel.perf_event_max_sample_rate to 63000 [ 429.870947] perf: interrupt took too long (3963 > 3961), lowering kernel.perf_event_max_sample_rate to 50250 I have been restarting weekly, and the issue is only getting worse, any thoughts?, Is there a newer version of ASL? Thanks, Mark _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.