On 12/15/2013 10:39 AM, Bob wrote:
I'm looking for a way to reduce the ID audio level when it occurs during repeater use. Might this be the "idtalkover" function in rpt.conf? If so, how is that level set? In software? idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
I'm an linux/asterisk/app_rpt newbie, so no risk of talking down to me. I just ask the answer be in simple terms :-)
In rpt.conf, there's a stanza called [morse[node_#]] speed=20 ; Approximate speed in WPM frequency=600 ; Morse Telemetry Frequency amplitude=2048 ; Morse Telemetry Amplitude idfrequency=650 ; Morse ID Frequency idamplitude=1026 ; Morse ID Amplitude If you have a voice file, if Allison comes up and starts to ID your system, with idfrequency and amplitude set somewhere -lower- than everything else, she'll go away, but only on ID's. when it spits out connect messages, they'll be on up in volume. idtalkover=|iW5OMR short. simple. works