Mike, Thanks. I can check the COS logic. If it were inverted though, would I be receiving anything? I definitely get signal as long as the carrier is active before I transmit. I'll check permissions too. On Sat, Sep 1, 2018, at 20:42, Mike wrote:
While I can't say for sure, it sounds like you have the logic inverted on your cos of the remote base. If I am reading you right.
The archive directory must exist. look for type errors both in your definition in rpt.conf and the actual directory would be the first thing in your checks. archivedir=/var/www/html/somewhere/archive It will only create a director <NODE#> to put the data in if it finds the defined path to do it. Also check ownership and permissions of the directory.
Hope that gets you somewhere.
...mike/kb8jnm
On 9/1/2018 9:12 PM, Rachel Olivero wrote:
Good evening all:
I presently have my TM-D700 connected to a Raspberry Pi with a URI and configured as a remote base. I'm using iaxRpt to control/use it. I'm noticing that if there is received audio and I transmit, everything works fine. When I unkey, I get the repeater audio immediately back over iaxRpt. However, if I transmit to a repeater that has had no carrier previously, I don't hear any returned audio. I've stood next to the radio and verified that I am keying the repeater. Tonight, a station responded and I got no audio until the carrier dropped and a new signal was detected. I'm not sure if this is a D700 issue, a URI issue, or an app_rpt issue. I'm open to any suggestions. One other question, I defined an archivedir in rpt.conf, but I don't see audio files in the directory. I see the promised text file, but no audio. Did I miss a step? Thanks, Rachel AD9O
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.