My guess there has to be a way to have it play a 2 second file of silence before any transmission On 10/2/2011 10:52 PM, Ken wrote:
Take the sound recordings that say "good morning" "Good after noon" etc., and re-record them - putting 2 seconds of dead air in front of the audio. Ken
-----Original Message----- From: Matt Beasant <g4rky@yahoo.co.uk> To: Travis Best <w3tmb1@gmail.com> Cc: App_rpt-users <App_rpt-users@ohnosec.org> Sent: Sun, Oct 2, 2011 11:13 pm Subject: Re: [App_rpt-users] TX Delay??
Hi Travis,
In rpt.conf there is a section called wait-times.
Here is a copy of the section I have in my rpt.conf file:
(located in the node definition stanza near the top of rpt.conf, under the node number) wait_times=wait-times; Wait times
(then located between the [morse] stanza and the [node] stanza)
; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ;
[wait-times] telemwait=500 ; Time to wait before sending most telemetry idwait=500 ; Time to wait before starting ID unkeywait=500 ; Time to wait after unkey before sending CT's and link telemetry calltermwait=2000 ; Time to wait before announcing "call terminated"
Adjust the telemwait delay to suit your needs.
Cheers
Matt G4RKY
On 1 October 2011 23:34, Travis Best <w3tmb1@gmail.com <mailto:w3tmb1@gmail.com>> wrote:
Is there a way to delay the messages the XIPAR server put over the air?? The problem I am having is for example if I send the *81 command to get the current time I will only hear the min's because it is not keyed up long enough before it starts talking.
Thanks for any help W3TMB Travis _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users