Dear Bob, Here is how I reboot anything from afar. http://tell.hu/en/products/gsm_communicators/compact_gsm2 73, Eric 4Z1UG / WA6IGR Allstar Node: 28422 4Z1UG@guth.us<mailto:4Z1UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bob Roszkowski Sent: Tuesday, April 09, 2013 7:35 AM To: Bob - AF6D Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Using an external Controller Bob, I still use my RC210s at all my sites. I have a lot of confidence in AllStar running a repeater but the controller is one thing I have a hard time letting go. I deal a bunch with PCs and no matter what OS you are using, they will lock up eventually because of hardware, heat, etc. I had a site that had a good PC, but every once and a while, the machine would lock up or do something and allstar would halt. Couldn't even remote in. So, I had to go to the site and reboot just to get the machine back on the air. After the third time, I reinstalled the controller. Machine was still flaky but all I lost was the link and the repeater was still on the air. boB On Mon, Apr 8, 2013 at 12:07 AM, Bob - AF6D <bob@af6d.com<mailto:bob@af6d.com>> wrote: I know that there are so many features that I have yet to learn about. But there are many features available with my rc10. Is there any way that they may co-exist, even if using a repeater in between? _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users