Thanks Jim for entertaining and working on the new and undiscovered application! The GM300 series of radios will do channel-steering, by using a BCD design of up to five bits to select between 32 modes. I don't recall if the Maxtrac's will do that, but its certainly something that could be linked back into a macro, etc. Tony On 09/29/2010 11:11 AM, Jim Duuuude wrote:
That's an interesting question. Obviously the USB device has a couple of outputs on it that certainly could be accessed by the chan_usbradio and/or chan_simpleusb modules and controlled through app_rpt. The URI was also designed with this in mind, being that we brought all the outputs out to the connector.
In nearly 10 years that this project has been going on, you are the FIRST person to even ask this question or show any interest in using these outputs. This is the main reason why I never bothered to implement this functionality.
Sure, it can be done. Yeah, Ill work on this. Heck, even if you're the only person that ever uses it, at least you can benefit from the work involved.
JIM WB6NIL
Date: Wed, 29 Sep 2010 10:05:21 -0400 From: n3fe@repeater.net To: app_rpt-users@qrvc.com Subject: [App_rpt-users] Maxtrac as a remote base
I have been up and running now for about a month. I have added a maxtrac radio to use as a remote base. On my other controllers I would pulse a line to ground momentarily to move the channel up or down. I have done some reading and I haven't seen anything that talks about app_rpt doing this.
Does asterisk/app_rpt have the ability to work with outputs? What would need to be done to be able to do something like this if something isn't already in place for it?
Corey N3FE
-- This message was scanned and is believed to be clean.
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users