Charles, Try on the shell outside of the asterisk cli. If for some reason that fails, the binaries you are looking for should be located at /usr/sbin/. Best, Matt Dodd On Jun 17, 2013, at 7:17 PM, Charles Rader <kc5dgc@live.com> wrote:
I followed the instructions at ohnosec.ord/drupal.node/193 to switch over to simpleusb on a ACID node. Up to the delete /etc/init.d/usbradio and the touch /etc/init.d/simpleusb which neither was located there. So I went and reinstalled ACID and changed my Allstart node config to reflect using simpleusb. This is a private node that I am running so after the install I changed all the conf files to reflect my private node. Then I went in to the Asterisk cli to tune everything up. There I ran into a problem there is no simpleusb-tune-menu or radio tune commands. What I am missing here? How do you tune the radio with simpleusb?
I typed Help as the Asterisk cli and it shows nothing for any sort of tune.
Thank you, Charles (kc5dgc)
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users