More then one way to use full duplex - depending on the situation, if you are not in one location/at your node all the time, get an extra Baofeng ~$30 or as I usually do setup a sound fob ~$10 and make it a private node # say 1010 for example and connect it *2(yournode) or permanent connect - and listen via speaker or headphones wired or wireless depending on how far you need to go. I started out with an autopatch/repeater back ~15 years ago... finally ended up building a 440 Repeater, I still use a simplex radio icom 207 and just monitor it with my private node via soundfob - easy/cheap! Also a great way to listen to Allstar and save your HT's battery if your just sitting at home anyway. Can also duplex using a VOIP app on a computer/smart phone/tablet like 'zoiper' as an example... to monitor the audio of the node! I do this at times using wifi or 3G/4G. Just have to configure your asterisk to accept incoming connection from the other device, rather trivial. "Got Root?" How many software engineers does it take to change a light bulb? *None. It's a hardware problem.* Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers. A ntennas P oorly P laced L acks E ngineering The best way to accelerate a computer running Windows is at 9.81 m/s². *"I get paid to support Windows, I use Linux to get work done."* On Sat, Jan 17, 2015 at 2:57 PM, George Csahanin <george@dyb.com> wrote:
Both are done. I’ve had both at the house, just depends on how much effort you want to put into it. Right now, as there is nobody local I need to communicate with it runs as a simplex node, though on a repeater pair, listens 446.xxx and transmits 441.xxx. Probably confusing to anyone listening to it, but not an issue. I usually have a connection to a couple of repeaters in another state. But at another home I have a true simplex node on 446.000. When I get a wide area system back up it won’t be simplex.
I also have my node function with telemetry tones and hang time. So I know when I’m connected and when I’m disconnects.
Now full duplex is neat. I used to have a duplex Micor in my car back in the 70’s. Very slick.
George J Csahanin W2DB 2360 Cedar Park, TX
*From:* Elden Fenison <w7ldn@w7ldn.com> *Sent:* Saturday, January 17, 2015 1:19 PM *To:* App_rpt-users@ohnosec.org *Subject:* [App_rpt-users] simplex vs duplex for a home node
Please excuse my ignorance on this. But one of the advantages of Allstar over say IRLP is the ability to operate full-duplex. My understanding on this is limited. But apparently full-duplex is not possible without setting up a repeater.
Since many folks seem to setup nodes in their residences... is it common for them to have repeater setups that allow them full-duplex operation at home? Is there a relatively cheap/easy way to do this?
Any tips are very appreciated. :)
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.