Mike, That is probably the easiest part to set-up. The following example works in the "RADIO" context of extensions.conf exten => _5XXX,1,Dial(sip/${EXTEN},17) ;dial ext/functions on this box exten => _5XXX,2,VoiceMail(${EXTEN}) ; voicemail if failed exten => _6XXX,1,Dial,IAX2/PBX/${EXTEN} ;dial my ext/functions on pbx3 Notes: all extensions on the local box are 4 digits starting with a 5 All 4 digit extensions on the other box labeled PBX start with a 6 and the "PBX" in the string above denotes my outbound route labeled as such the same. It will use that route created to reach the extension on the other box (not explained here). At the bottom of this there needs to be a fall-through where there is a hang-up string. But the above example not necessarily going to work for everyone because many have configured other things and used or changed contexts for other reasons without realizing the complications of doing so when you want "generic help". So when many of us HELP, we are often confused as to why things do not work as they might have. I know for some of you this is still a stretch, so there is a free guide on asterisk. And note there are other ways of doing the same thing, as always in asterisk. ...mike/kb8jnm
Angelo,
I did reply 5 hours before this message. Perhaps you need to check your junk email filter for those of us that sent you a direct reply. Not everyone has the time to read the list everyday. And It's not a simple answer type question you ask. Will require time.
So Angelo,
Is the purpose of reverse phone patch:
To "ring-in" on the repeater from a outside line (do have outside line configed already)
or
To have control/talk from a local sip/iax device
or something else
the config will be different dependent on purpose.
...mike/kb8jnm
WOW - not one reply. Did I ask a NO NO or something???
73 de Angelo
----- Original Message ----- From: "Angelo Glorioso" <n5uxt@hotmail.com> To: <app_rpt-users@ohnosec.org> Sent: Tuesday, April 21, 2015 6:22 PM Subject: [App_rpt-users] Reverse Phone Patch
Hi All,
I was able to get the phone patch to work using SIP with no problem with the instructions on the support site, but I can not find anything when it comes to reverse phone patch configurations. I am a novice at this, so, be gentle. Am I missing something??
Any config files would be appreciated.
73 de Angelo
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.